DR FIXIT ROOFMAN WHITE

DR FIXIT ROOFMAN WHITE

DR FIXIT ROOFMAN WHITE

DR FIXIT ROOFMAN WHITE


UNIQUE HEAT REFLECTING ROOF-WATERPROOFING COATING


DR FIXIT ROOFMAN WHITE
Description

Dr. Fixit Roofseal Top Coat is a single component, insulating elastomeric waterproof coating for roofs that will offer a seal against water and heat, waterproofing and insulating in easy steps. This monolithic waterproof membrane provides superior crack bridging and long lasting tough weather protective seal for exposed (new and old) roof surfaces. Dr. Fixit Roofseal Top Coat combines the benefits of waterproofing as well as heat reduction in a single product. No additional protective coating is required for roof subjected to foot traffic. Easy to apply by brush/ roller.

  • USP - Dr. Fixit Roofseal Classic combines the benefits of waterproofing as well as heat reduction in a single product
  • PROTECTIVE FOR OLD & NEW SURFACES - Long lasting, tough & weather protective seal for exposed new and old roof surfaces
  • VERTICAL & ROOF SURFACES – Roofseal Classic can be used over roof surfaces up to 3000 sqft
  • HEAT RESISTANT & UV Resistant - Reduces surface temperature up to 10 degrees Celsius and UV resistant
  • NO DILUTION – Roofseal Classic requires no dilution

Typical Applications
  • Building Roofs / Terraces – Flat & Slope
  • Over Existing cementitious waterproofing treatments like sound brick-bat coba, concrete screeds, etc.

Features
  • Waterproofing – Tough durable elastic membrane with > 200% elongation
  • Good Adhesion – Bonds strongly to the substrate
  • Crack bridging – High flexibility of materials enables it to bridge hairline cracks
  • Tough and abrasion resistant – Suitable for light foot traffic
  • Economical – Cost effective and durable coating
  • Bright white – Heat Reflective and UV resistant top coat
  • Temperature reduction – Reduces surface temperature up to 10ºC** in the pick summer
  • Eco friendly – Low VOC

Precautions & Limitations
  • All corners, gaps, joints, Roof leak repair area & outlets shall be coated with two extra coats.
  • Do not apply if rain is expected within 48 hours after application.
  • Do not apply to flat surfaces with poor drainage or where ponding water will exist.
  • The product is designed only for foot traffic and not vehicular or movement of machinery or equipment.
  • Do not apply Dr. Fixit Roofseal Top Coat over expansion or moving joints directly.
  • To achieve the full proof waterproofing, parapet walls should be covered with Dr. Fixit Raincoat.
  • Durability of coating is determined by the application process, the weather conditions during and after application, the suitability & quality of the workmanship and the total applied coating thickness.
  • Do not apply if the surface temperature is greater than 40°C or below 10°C, or likely to fall below 10°C during the application or drying period.
  • Keep the material in close when not in use.
  • To ensure recommended DFT use forced coverage method.
  • Any large area more than 300 Sq.mtr, please consult Dr. Fixit Technical service team.
  • Coated surface must be inspected and cleaned bi-annually to maintain overall reflectivity properties, this will help maintain your overall aesthetic appearance and preserve Dr. Fixit Roofseal Top Coat coating due to environmental factor

Health & Safety Precautions
  • Skin Contact: Wash skin with soap & water. Remove contaminated clothes.
  • On eye contact: Immediately splash eyes with plenty of water. Consult Physician if irritation persists.
  • Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a Physician

Interested in waterproofing products? Contact Us Today!


We provide the highest quality Waterproofing Systems, Roofing Systems and Surfacing Systems.


Get Quote

© 2024-25 | K K Waterproofing Pvt. Ltd. | All rights reserved.